To order:
- Using the Selection Guide,
fill in the 2nd and 3rd digits to identify the elastomer and its corresponding
conductive particle.
- Use the 4th digit for the
product configuration:
3 Sheet material
4 Fabricated gasket
- Select thickness and size
from the Sheet Identification Chart below. Replace the 5th and 6th digits with
the thickness in decimal inches and the 7th and 8th digits with the sheet size
identification number. Do not use metric dimensions to order.
- Use the 9th and 10th digits
to identify Shore A durometer of the elastomer from the Selection Guide. To
specify pressure sensitive adhesive, use "1" as the 10th digit.
NOTE: If you are ordering
fabricated gaskets, leave the 5th through 8th digits as XXXX. CSI will assign a
sequential part number when the design has been finalized.
Example:
To order Shielding Express NP sheet
material, of 40 durometer silicone elastomer, size 15" x 30", .032" thick;
order 66830312-40. If pressure sensitive is required; order
6683-0312-41. |