To order:
- Using the Selection Guide,
fill in the 2nd and 3rd digits to identity the elastomer and its corresponding
conductive particle.
- Use the 4th digit to
identity the type of waveguide gasket required:
8 Flat
reinforced (cover) 9 Molded (choke)
- Use the 5th, 6th, 7th and
8th digits to identify the flange type:
UG Enter
the 2-, 3- or 4-digit number, e.g. 0051, 0597, 1734. CMR
Enter M plus the 3-digit number, e.g. M187, M229.
CPR Enter P plus the 2- or 3-digit number, e.g.
P090, P137. For non-standard flanges, enter XXXX. CSI will assign a
part number.
- Use the 9th digit to
identity Shore A durometer of the elastomer from the Selection Guide, using the
1st digit only of the durometer.
- Leave the 10th digit as X.
CSI will assign a number.
Example: To order
Shielding Express SPC waveguide choke (molded)
gaskets, EIA size WR-90, flange UG-40A/U, silicone elastomer, 60 durometer;
order 6279-0040-6X. |